10
3
ASSEMBLY
STEP 3
HARDWARE
STEP 3
1. Attach the left (
5
) and right (
4
) Console Mast Tubes and
accompanying brackets (
7
Left Side &
8
Right Side) to the base
frame with three Flat Washers (
79
), three Split Washers (
86
),
and three Button Head Socket Bolts (
123
) from each side and
two Button Head Socket Bolts (
100
) & Curved Washers (
124
) at
the front of each side. Partially tighten using the M6 Allen
Wrench (
104
) & M5 Allen Wrench & Phillips Head Screw Driver
(
103
).
Note:
Don’t tighten the bolts completely until after Step 7.
4
ASSEMBLY
STEP 4
To complete this step, it is recommended that you find something
to rest the console on at the appropriate height or have someone
hold the console while you connect the cables
1. Connect the Speed Switch Cable (
37
) to the upper Speed Cable (
34
).
2. Connect the Computer Cable (
33
) to the upper Computer Cable (
31
).
3. Connect the Incline Switch Cable (
38
) to the upper Incline Cable (
35
).
Before attaching the hardware to Step 5, make sure the cables you just
connected don’t get pinched in between the steel tubing. If they do, this may
cause issues that prevent the treadmill from operating properly.
#79
. Ø10mm × Ø19mm×
1.5T Flat Washer (6 pcs)
#86
. 3/8” x 2T
Split Washer (6 pcs)
#100
. 5/16” x 3/4”
Button Head Socket
Bolt (4 pcs)
#123
. 3/8” x 2-1/2”
Button Head Socket
Bolt (6 pcs)
#124
. Ø8mm × Ø23mm
× 1.5T Curved Washer
(4 pcs)
Содержание S77
Страница 1: ...OWNER S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL ...
Страница 30: ...30 EXPLODED VIEW DIAGRAM ...
Страница 35: ...35 ...
Страница 36: ......
