4.3.7 Settings Screen
From the main screen, press the F4 button four times until the settings screen is displayed� The settings screen is
displayed in a total of nine screens as you scroll down, as shown in
Figure 62
�
Figure 62: Settings screens
On the first settings screen, pressing the F5 button will prompt a password window to pop up� After you enter the correct
password, the function of the F2, F3, and F4 buttons will switch from the primary functions to the secondary functions, as
shown in Table 23�
4.4 Entering a Password
1. On the password prompt window, press the F5 button, the first digit will become editable, press the F3 button to
enter the correct number�
2. Press the F4 button, the second digit will become editable, press the F3 button to enter the correct number�
3. Enter the rest of the password digits using the same method in Step 2, and press the F5 button when complete�
SolaHD S5KC Series
Redundant set
Remote comms shutdown
Bypass set
Output Frequency
Output Voltage
Sync Range
Enabled
Disabled
Enabled
50Hz
230
± 5.0Hz
First Screen
SolaHD S5KC Series
Remote shutdown delay
Bypass upper limit
Bypass lowerlimit
Guaranteed shutdown
Bypass alarm mode
Serial comm. select
+10%
5second
-15%
Disabled
Enabled
INTERFACE2
Second Screen
SolaHD S5KC Series
Auto restart mode
Auto restart capacity
Auto restart delay
Display contrast
Date & time
Command password
20%
Enabled
6second
2012-01-01 10:45:20
*******
Third Screen
SolaHD S5KC Series
Max load alarm
Max load threshold
Redundant alarm mode
Communication address
Air filter reminder
IT System Compatibility
0.0kVa
Disabled
Disabled
13
Disabled
Disabled
Fourth Screen
SolaHD S5KC Series
IT System Compatibility
UPS ID
Company Name
Contact Number
Load Factory Default
Disabled
No
Fifth Screen
S5KC SERIES USER MANUAL | 55
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]