socomec SUNSYS HES L, Руководство пользователя

Страница: 96 / 114

SUNSYS HES L - 551697A - SOCOMEC
96
EN
13. MAINTENANCE
CAUTION!
Lethal voltages exist inside the unit during normal, maintenance and service operations.
Disconnect and lock-out all power sources before working inside the unit.
For your safety, it is imperative that you check, and do not assume, that all accessible terminals (not
just those being contacted) are proven electrically dead (no potential between all connections or to
ground).
CAUTION!
Before carrying out any operations on the unit read the “Important Safety Instructions” chapter carefully.
CAUTION!
SUNSYS specific maintenance should be performed only by Socomec trained and qualified service personnel.
SUNSYS routine maintenance should be performed only by personnel trained and qualified, as per local
regulations.
The SUNSYS HES L will require periodic attention and maintenance in order to ensure trouble-free operation. Maintenance
will be considered in the following phases:
1. Timely Inspection and Corrective Actions: Driven by automated alarms and warnings
2.Preventative Maintenance:
a. Routine Visits: Yearly inspections with follow up corrective actions if required and maintenance of specific
components
b. Specific visits: regular maintenance of specific components at specified periodic intervals
3. End of life refresh maintenance
Before performing any maintenance activity, the system must be switched off and isolated following the procedure
described in Manual System Power Off Chapter.
13.1. Timely inspections and corrective actions
Timely inspections and associated corrective actions are to be driven by any system generated alarms and warnings. The
potential alarms and warnings are listed in the Troubleshooting part of this manual.
Note: The service provider is responsible for managing the timely service of the unit based on the alerts and alarms
delivered from the SUNSYS HES L.
13.2. Preventative maintenance
Maintenance requires accurate functionality checks of the various electronic and mechanical parts and, if necessary, the
replacement of parts subject to wear and tear (filters, fans and capacitors). It is recommended (even mandatory in case of
warranty extensions) to carry out annual preventative maintenance, in order to keep the equipment at the maximum level
of efficiency and to avoid the installation being out of service with possible damage/risks. Maintenance consists of parts
replacement as well as functionality checks on:
- Electronic and mechanical parts
- Dust removal
- Software updating (only possible by Socomecs’ teams)
- Environmental checks