socomec SUNSYS HES L, Руководство пользователя

Страница: 55 / 114

SUNSYS HES L - 551697A - SOCOMEC
55
EN
Figure 49. Cable glands plates
To install the power cables, follow the procedure below:
1) Remove the 3 plates from the bottom
2) Drill the holes on the plates. See the layout suggested later on this chapter.
3) Insert the Nema 3R/IP55 glands (not delivered) in the holes
4) Put the plates back in place and fix them to the baseplate
5) Start to fix the cables
For each cable, follow this procedure:
A) insert the cable inside the cable gland
B) fix the cable to the power terminal
C) fix the gland with the proper torque
Apply this procedure starting from the rear row of cables and proceeding to the front.
6) After the connection of all the cables (described in the present chapter), re-close the plastic panel with his 4 screws.
7) Make sure that all the cable glands are in place and properly fixed in order to grant the IP55 protection of the system.