socomec Green Power 100, Руководство по эксплуатации

Страница: 7 / 64

ENGLISH
IOMMASGPXX00-GB_01
7
Green Power
100-120 kVA
the use of an isolation transformer is required should it be necessary to modify the neutral arrangements
downstream of the UPS.
• If the UPS needs to be scrapped, it is essential to entrust the equipment solely and exclusively to specialist disposal
companies. These are obliged to break up and dispose of the various components in accordance with the legal
provisions in force nationally.
• Before connecting the external battery cabinet, check that this is fully compatible with the model of UPS.
• The use of external battery cabinets not supplied by the manufacturers is not recommended.
• Switch off and isolate the UPS and then wait for 5 minutes before removing the protection panels in order to carry
out work on parts under dangerous voltage.
• Danger of explosion if the batteries are replaced with others of the wrong type.
• The batteries are considered as toxic waste. If they are replaced, entrust the used batteries solely and exclusively
to specialist disposal companies. As provided for by the local laws in force, batteries must not be disposed of with
other industrial or domestic waste.
It is very dangerous to touch any part of the batteries as there is no isolation between the batteries
and the mains power source.
The product you have chosen is designed for commercial and industrial use only. In order to be used for particular
“critical applications” such as life support systems, medical applications, commercial transportation, nuclear facilities
or any other application or systems where product failure is likely to cause substantial harms to person or property,
the products may have to be adapted. For such uses we would advise you to contact SOCOMEC UPS beforehand to
confi rm the ability of these products to meet the requested level of safety, performance, reliability and compliance
with applicable laws, regulations and specifi cations.
WARNING!
This is a product for commercial and industrial application in the second environment – installation
restrictions or additional measures may be needed to prevent disturbances.
2.2 DESCRIPTION OF THE SYMBOLS USED ON THE LABELS APPLIED TO THE UNIT.
All the precautions and the warnings on the labels and plates on the inside and outside of the equipment should
be respected.
DANGER! HIGH VOLTAGE (BLACK/YELLOW)
GROUND TERMINAL
READ THE USER MANUAL BEFORE USING THE UNIT
2
SAFETY