IQH3A IQ 3U Modular Enclosure
www.snellgroup.com
Installation
Issue 2 Rev 2
Page 36
©
2014 Snell Limited
3.15.4.1
Configuring IP Bridging
An IP bridge requires two Gateways, both connected to the IP infrastructure and set to
RollCall addresses in the range 0x01-0x0F. An example configuration might be:
It is recommended that “Only Accept This Address” is checked at both ends to prevent other
Gateways from establishing bridge connections, and that “Connect Automatically” is checked
at both ends, so the bridge is re-connected if it should be disconnected for any reason.
Gateway 1
Gateway 2
Ethernet -> Unit IP Address
Ethernet -> Unit IP Address
RollCall IP -> Connect to
RollCall IP -> Connect to
