IQH3A IQ 3U Modular Enclosure
www.snellgroup.com
About this Manual
Issue 2 Rev 2
Page 2
©
2014 Snell Limited
About this Manual
Products Covered
This manual provides information for the installation and operation of the Snell IQH3A 3U
modular enclosure fitted with the RCIF3U2C Gateway Card.
Software Version
This unit is fitted with software version 5.19.19.
Manufacturer’s Notice
Copyright protection claimed includes all forms and matters of copyrightable material and
information now allowed by statutory or judicial law or hereinafter granted, including without
limitation, material generated from the software programs which are displayed on the screen
such as icons, screen display looks, etc.
The software described in this manual is furnished under a license agreement and may not be
reproduced or copied in any manner without prior agreement with Snell Ltd., or their
authorized agents. Information in this manual and software are subject to change without
notice and does not represent a commitment on the part of Snell Ltd.
Reproduction or disassembly of embedded computer programs or algorithms prohibited.
Snell operates a policy of continuous improvement and development. Snell reserves the right
to make changes and improvements to any of the products described in this document
without prior notice.
No responsibility is taken by the manufacturer or supplier for any non-compliance to EMC
standards due to incorrect installation.
All rights reserved. No part of this publication can be transmitted or reproduced in any form or
by any means, electronic or mechanical, including photocopy, recording or any information
storage and retrieval system, without permission being granted, in writing, by the publishers
or their authorized agents.
Trademarks
Microsoft
®
is a registered trademark of Microsoft
®
Corporation in the United States and other
countries.
Windows
®
is a registered trademark of Microsoft
®
Corporation in the United States and other
countries.
RollCall™ is a trademark of Snell Limited.
