IQH3A IQ 3U Modular Enclosure
www.snellgroup.com
Operation
Issue 2 Rev 2
Page 47
©
2014 Snell Limited
4.4.6 RollCall IP History
The Gateway may reject IP connections if they do not match the client address set or if the
limit on IP connections has been reached.
•
Last Rejected Client:
This shows the IP address of the last client that the Gateway
rejected.
•
Reject Count:
This shows the number of attempted IP connections that this Gateway
has rejected.
•
Last Closed Client:
IP address of the last client (bridge or other) to close their
connection to gateway.
•
Closed Count:
This shows how many IP connections have been closed. The count
includes connections that have been closed by the Gateway and by the remote client.
4.4.7 RollCall IP Bridging
This menu controls the IP half bridge function of the Gateway.
•
Connect to:
This controls the IP address of the remote half of the IP bridge. This is
the address that the Gateway will connect to when it establishes a bridge. The
Gateway will accept bridge connections from other IP address unless the Only this
Addr check box is set.
•
Hide network (Control only):
This control allows the remote network to be hidden
from browsers. All other network traffic is allowed through the bridge.
This feature is useful where 2 separate networks are linked with an IP-Bridge (for
control purposes, e.g. Rollpod), but the networks are connected to client PC's using
IP-Proxy.
•
Bridge IP Port:
This controls the IP port used for bridge connections. It controls both
the port that the Gateway will accept connections on, and the port the Gateway will
attempt to connect to if it tries to establish a bridge.
•
Only Accept this Addr:
If this check box is set then the Gateway will only accept
incoming bridge connections from the address specified by Connect to.
•
Pass WAN packets:
•
SP_IAM
: If this check box is checked then the Gateway will pass wide area I AM
messages received over the IP bridge to the RollNet network.
