IQH3A IQ 3U Modular Enclosure
www.snellgroup.com
Operation
Issue 2 Rev 2
Page 52
©
2014 Snell Limited
4.6.2 Type
This displays the unique identifier of the module fitted in the slot. See
4.6.6 Examples of Slot
Use on page 54
The following controls are provided:
•
Bound Type ID:
This allows the slot to be associated with a particular type of module
(e.g. a encoder type 284). If a module matching this type ID is fitted, the Gateway will
use the user given name. If an incorrect card type is installed in the slot the RollCall ID
will not be correct and the actual card type will be displayed in the module browser.
The names and types may be setup before the installation of the modules. Edit the
Bound Type ID after editing the Editable Name.
To enter/modify the Bound Type ID, type a new number in the editable field and click
the Save (
S
) button. To return to the default number, click the Preset (
P
) button.
•
Installed Unit ID:
This displays the identifier of the module fitted in the slot position.
4.6.3 Non RollCall
This allows a non-RollCall card inhabiting slot to be identified. See
4.6.6 Examples of Slot
Use on page 54.
Passive units can be given a name, indicating to RollMap that a card exists.
•
Enable:
Select this option to indicate that a non-RollCall card is in the slot. When this
option is selected, the installed unit type of the passive card appears as NOT RollCall
3!, and the installed unit ID appears as 65535.
•
IDNAME:
This field allows an IDNAME log field to be associated with logs from a
non-RollCall card. To enter/modify the Non RollCall ID name, type a new name in the
editable field and click the Save (
S
) button. To return to the default name, click the
Preset (
P
) button.
Bound Type ID
Installed Unit ID
Preset
Save
Note:
If there is a RollCall-responsive card in the slot, selecting this option has no effect.
Note:
Non-RollCall cards send a
MSG=NON ROLLCALLMODULE
log to indicate their presence.
Enable
ID Name
Preset
Save
