background image

INSTALL:

4x

INSTALL:

4x

INSTALL:

4x

INSTALL THE ITX MOTHERBOARD WITH 4x MOTHERBOARD SCREWS

Plug in all cables you need for 
your build into the power 
supply first before installing it 
for easier installation

The right-side panel can be 
secured with a screw if cables 
are pushing against it.

CLEARANCE

REAR

SIDE

FRONT

INSTRUCTION MANUAL

Thank you for choosing Phanteks. Please take a moment to 

carefully go through the manual. Phanteks will not take 

responsibility for any damages incurred due to incorrect 

installation or usage of this product.

This manual supports the following models:

PH-EC200AC_BK   

(2x 120 mm Black Fans)

PH-EC200ATG_DBK  

(2x 120 mm D-RGB Fans)

INTRODUCTION

PRODUCT OVERVIEW

ECLIPSE P200A

INSTRUCTION MANUAL V1.0

V1.0

 

 

English

1. Power Button

2. Reset Button 

       (P200AC Only)

3. D-RGB Mode

       (P200ATG-D Only)

4. D-RGB Color

       (P200ATG-D only)

5. Headphone / Microphone

6. USB-C Gen 2 

       (P200ATG-D only)

7. USB 3.0

Francais

1. Bouton d’alimentation

2. Bouton de réinitialisation

      (P200AC Only)

3. D-RGB Mode 

      (P200ATG-D Only)

4. D-RGB Color

      (P200ATG-D Only)

5. Casque / Microphone

6. USB-C Gen 2

       (P200ATG-D only)

7. USB 3.0

Deutch

1. Ein-/Aus Schalter

2. Reset-Knopf

      (P200AC Only)

3. D-RGB Mode

      (P200ATG-D Only)

4. D-RGB Color

      (P200ATG-D Only)

5. Kopfhörer / Mikrofon

6. USB-C Gen 2

       (P200ATG-D only)

7. USB 3.0

Espanol

1. Botón de encendido

2. Botón de reinicio

      (P200AC Only)

3. D-RGB Mode

      (P200ATG-D Only)

4. D-RGB Color

      (P200ATG-D Only)

5. Auricular / Micrófono

6. USB-C Gen 2

       (P200ATG-D only)

7. USB 3.0

ECLIPSE P200A Performance 

(PH-EC200AC_BK)

ECLIPSE P200A DIGITAL-RGB 

(PH-EC200ATG_DBK)

FRONT I/O FEATURES

STEP 2.

MOTHERBOARD INSTALLATION

THE POWER SUPPLY IS INSTALLED THROUGH THE REAR OF THE CHASSIS. LOOSEN THUMBSCREWS TO REMOVE PSU BRACKET. 

INSTALL PSU TO BRACKET WITH 4x PSU SCREWS.

STEP 3.

POWER SUPPLY INSTALLATION

INSTALL THE SSD(s) WITH 4x SSD SCREWS ON THE DEDICATED

SSD BRACKET AND MOUNT IT BACK INTO THE CHASSIS.

STEP 4.

STORAGE INSTALLATION - Dedicated 2.5” SSD Bracket

STEP 1.

REMOVING CHASSIS PANELS

a.

      PULL THE SIDE PANEL, THEN LIFT THE PANEL UP 

          TO REMOVE IT

b.

       REMOVE FRONT PANEL 

           BY PULLING ON THE 

           PANEL FROM BELOW

c.

       REMOVE THE BOTTOM

          DUST FILTER FROM

          THE FRONT

120

FAN

120

RAD

5

7

6

4

3

1

120

FAN

120

RAD

120

FAN

140

FAN

BOTTOM

120

FAN

120

RAD

140

RAD

CPU Cooler Height 

    165 mm

GPU Clearance  

    355 mm

GPU Thickness 

    3-slot, 65mm

5

7

6*

2

1

LOOSEN:

2x

P200A PRE-INSTALLED ACCESSORIES:   

P200A INCLUDED ACCESSORIES:   

2x 120 mm Black or

2x 120 mm D-RGB

4x PSU Screw 3x Case Screw 1x Thumb Screw

6x Zip Ties

2x SSD Cover

1x Vertical GPU Mount

21x Motherboard

+ SSD Screw

COLORS

2 SEC

MODES
SOLID

BREATHING

RADAR

SPARKLE

RAINBOW

PRESS  AND HOLD THE MODE BUTTON TO TURN OFF LEDS

PRESS AGAIN TO TURN ON

DIGITAL-RGB CONTROLS (P200ATG_D MODEL)

1

2

1

2

*Optional upgrade

Отзывы: