Snap-On ControlTech CTLNK1R240, Руководство пользователя

Страница: 15 / 36


Advanced Settings
Accessing Advanced Settings
Advanced settings are accessed from SETTINGS menu selection on main menu.
1. From target torque or angle screen, press and hold ENTER button for 3 seconds.
2. Highlight SETTINGS menu selection using UP/DOWN buttons.
3. Press ENTER button to display Settings menu.
Menu Selections:

EXIT - Exits Settings menu and returns to target screen.

SHOW INFO - Displays wrench operational information.

SLEEP TIME - Displays power down interval setup screen.

LCD CONTRAST - Displays LCD contrast setup screen.

KEY BEEP - Displays button press beep enable/disable setup screen.

AUTO BACKLIGHT - Displays auto backlight enable/disable screen to turn on backlight during
measurement.

TOGGLE BACKLGHT - Displays BACKLIGHT button toggle or timeout enable/disable screen.

VIBRATOR CONFIG - Displays vibrator ON/OFF configuration for when target reached.
4. To exit Settings menu and return to target torque or angle screen, press ENTER button while EXIT menu
selection is highlighted.
Note: All user configurable settings are stored in non-volatile memory and are retained while
power is off.
Show Info
Show Info menu selection displays wrench operational information.
1.
From Settings menu, press ENTER button while SHOW INFO selection is highlighted.
2.
SHOW INFO screen is displayed.
3.
UP/DOWN buttons are used to scroll screen.
Operational Information:

SN: Serial number assigned to wrench.

CAL: Date of last wrench calibration.

ISD: In-Service Date.

TCF: Torque Calibration Factor.

ACF: Angle Calibration Factor.

VER: Software version.

OVR CNT: Overtorque Counter tracks how many times an over-torque event occurred on wrench
(torque >125% of full scale).

TQZ: Torque Zero Offset.

ANZ: Angle Zero Offset.
4.
Pressing ENTER button exits Show Info screen and returns to Settings menu.
Settings menu
00
100.0
FT-LB
Target Screen
SHOW DATA
CLEAR DATA
CYCLE COUNT
SETTINGSs
UP/DOWN buttons
ENTER
button
EXIT
LANGUAGE
SET HEAD LENGTH
SHOW DATA
ENTER
button
held
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST