SMW SPACESAVER 2400S, Инструкция по установке, эксплуатации и обслуживанию

Страница: 42 / 86

Chapter 4 – Operation
4-16
SS2400T/S
4.10 BARFEEDER PARAMETERS
Barfeeder operation is controlled by parameters, which are divided into the following groups.
•
Operator Parameters
•
Service Parameters
Operator Parameters are technological parameters. The values of the technological
parameters can be stored as so called jobs in the Jobs Table and reload them into the
barfeeder memory, see below.
4.10.1 DATA MODE
Using the data mode it is possible to work with all parameters of the barfeeder. The
parameters can only be edited, when the barfeeder perform no automatic function (the key
does not light).
Parameter direct selection
Parameter group menu
Parameter number
Parameter order in the group
Take over
Fig.4.10 Data Mode
4.10.1.1 PARAMETER SELECTION
All parameters of the barfeeder have unique numbers assigned; the numbers can be used to
refer to the parameters. Therefore if you know the number of a parameter you are searching
for, you can enter the number in the field of parameter direct selection to get the information
you are finding quickly. If you do not know the parameter number, you must find the
parameter using the parameter group menu.
Parameter selection by listing
•
Using select Operator or Service Parameters and confirm by .
•
Now you can scroll through the relevant parameter group using .
Direct selection of the parameter
•
Using select the direct selection field.
•
Enter the parameter number and confirm it by .