SMW SPACESAVER 2400S, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 86

Chapter 1 – Description
1-2
SS2400T/S
1.3 CONCEPT
The barfeeder SS2400T/S is a powerful machine with a long service life and minimal
maintenance required. Its operation and functions are simple which facilitates the work even
to less skilled workers.
The barfeeder is controlled by means of the control panel in the right part of the machine,
where there is also the Q1 switch. There is an E-Stop pushbutton for emergency stop on the
control panel.
Bars are loaded in the magazine. Loading of bars into the lathe is ensured by a crank loading
mechanism with a flag and pusher.
On the rear side of the frame there are connectors X1, X2 for barfeeder interconnection with
the lathe.
1.4 TECHNICAL SPECIFICATION
Scope of application Bar dimension
Round cross section of bars 6 to 105 mm
(.250”-4.000”)
Hexagonal cross section of bars 8 to 90 mm
(.315”-3.500”)
Square cross section of bars 8 to 74 mm
(.315”-2.75”)
Pusher stroke
Design stroke 1539 mm
(60.59”)
Working stroke 1535 mm
(60.43”)
Maximum distance of the clamping device face from the pusher point
in back position 1530 mm
Bar length
Maximum length of bar handled by the barfeeder 1500 mm
(59.00”)
Actual max. length of the bar is limited by the length of the
spindle (with clamping cylinder and clamping device).
Magazine capacity depending on the bar diameter
3 bars ∅
105 mm
(4.00”)
Number limited by the table capacity
∅
6 mm
(.250”)
Total weight of all bars on the table must not exceed
250 kg. (550 lbs.)