Sentry 5000-32-IT Controller
Page 48 of 82
8.4
Home Page Selection
The user may select a GUI Home Page from the following choices:
•
Display Zones with Banner
–
When sensor modules have been assigned into Zone groups
(Commander Logic) the Display presents the Zone Name. Any alarm within the Zone group
causes a color change. When the Zone is touched the Module bar chart display will be presented
for the respective module addresses. When there are no alarms present a large banner displays
“Gas Detection System Condition Safe”.
•
Display Zones without Banner
–
Same as above except there is no Banner.
•
Display Modules with Banner
–
Provides bar graph view of up to 8 inputs per page, with
multiple pages available. When there are no alarms present a large banner displays “Gas
Detection System Condition Safe”.
•
Display Modules without Banner
–
Same as above except there is no Banner. This is the
system default view until a new Home screen view is selected.
•
Display only Alarms with Banner
–
This Home Screen shows only sensor modules that are in
alarm state.
When there are no alarms present a large banner displays “Gas Detection System
Condition Safe”.
To select a Home Page, navigate to System Management / Configuration / Set Display Defaults.
Содержание Sentry 5000-32-IT
