Sentry 5000-32-IT Controller
Page 68 of 82
8.10.1.5 Log Out
To secure a protected system:
•
Navigate to Access Management
•
The Detail Bar will d
isplay “Touch Logout to logout”
•
Touch Enter (E) key
8.10.1.6 Timeout
An unsecured protected system will automatically return to secure mode after a factory preset timeout of
90 minutes.
8.10.1.7 Set Module
The Set Module option defines two sensor module attributes: the sensor module number and the sensor
module tag.
To select a sensor module after full module discovery:
•
Select Set Module
•
Touch Enter (E) key to select the option
o
System will display set of available modules
•
Select a module number
•
Touch E key to select the function
After selecting a module number, the system will display a set of parameters for individual sensors.
NOTE: Module Discovery needs to be completed in order to set individual modules. All fields are
populated by Module Discovery for modules connected to the Modbus, editing is optional.
Analog module does not provide any information about the device, so all fields need to be
populated by user. See Section
for module discovery process.
Set Module
Select a Module
Содержание Sentry 5000-32-IT
