Sentry 5000-32-IT Controller
Page 77 of 82
8.10.2 Maintenance
System Maintenance provides access to the following functions:
System Maintenance
Manual Control
Force Inputs
Force Value
(
Modbus only
) Select a module address and force a gas
value. The value will be forced to the Module and read by the
controller for display and alarm purposes.
Force Trouble
(
Modbus only
) Select a module address and force trouble
condition. The value will be forced to the Module and read by
the controller for display and alarm purposes.
Clear Forced
Status
(
Modbus only
) Select a module address and clear any
forced condition.
Restart Module
Restart module having the same effect as cycling power.
Force/Clear Address Display
Force Address
Display
TBD
Clear Address
Display
TBD
Test Lamps
Test Lamps
Causes each front panel light to activate in turn (one time
only).
Calibrate 20mA Input
Steps the user through calibrating each analog input channel (applicable only for Analog Input
stacks).
Update SBC Firmware from USB
Steps the user through the process of copying firmware files from a USB memory stick to the
SBC.
Содержание Sentry 5000-32-IT
