Sentry 5000-32-IT Controller
Page 10 of 82
2.2.1 Carrier Board
The Carrier Board (
) is assembled in a DIN carrier that snaps into the DIN rail in the Platform.
The function of the Carrier is to provide communications connections between all Stacks and the SBC. In
addition, the Carrier Board has:
(1) Eight SPDT relays that are fully programmable via the Controller Commander logic
(2) Eight removable connectors for the relay wiring
(3) A rotary switch for setting the Stack address
– generally using the addresses 1, 2, and 3;
conforming to the 3 stack capacity in the standard Platform
(4) Sockets for connection of any available Interface board
LED’s:
(A) Factory Test
(B) Factory Test
(C) Run Heat Beat
(D) Trouble
(E) Tx Stack Coms
(F) Rx Stack Coms
(G) +3V Power
Figure 3: Carrier Board
A
B
C
D
E
F
G
Содержание Sentry 5000-32-IT
