SMC Networks LECSB, Руководство по эксплуатации, Страница: 41 / 48

-40-
・
LECSS(SSCNET III)
Alarm deactivation Display Name
Display Name Power Error CPU
W
ar
ni
ng
92 Battery cable disconnection warning
OFF ON reset reset 96 Home position setting warning
A
la
rms
10 Undervoltage 9F Battery warning
12 Memory error 1 (RAM) E0 Excessive regeneration warning
13 Clock error E1 Overload warning 1
15 Memory error 2 (EEP-ROM) E3 Absolute position counter warning
16 Encoder error 1 (At power on) E4 Parameter warning
17 Board error E6 Servo forced stop warning
19 Memory error 3 (Flash-ROM) E7
Servo system c
ontroller forced
stop warning
1A Motor combination error E8 Cooling fan speed reduction warning
20 Encoder error 2 E9 Main circuit off warning
24 Main circuit error EC Overload warning 2
25 Absolute position erase ED Output watt excess warning
30 Regenerative error
(Note 1) (Note 1) (Note 1)
31 Overspeed
32 Overcurrent
33 Overvoltage
34 Receive error 1
(Note 2)
35 Command frequency error
36 Receive error 2
37 Parameter error
45 Main circuit device overheat
(Note 1) (Note 1) (Note 1)
46 Servo motor overheat
(Note 1) (Note 1) (Note 1)
47 Cooling fan error
50 Overload 1
(Note 1) (Note 1) (Note 1)
51 Overload 2
(Note 1) (Note 1) (Note 1)
52 Error excessive
8A USB communication time-out error
8E USB communication error
888 Watchdog
Note 1. Deactivate the alarm about 30 minutes of cooling time after removing the cause of occurrence.
2. In some servo system controller communication status, the alarm factor may not be removed.