manualshive.com logo in svg

SMC Networks LECSB, Руководство по эксплуатации, Страница: 27 / 48

Поделиться
Скачать
SMC Networks LECSB Скачать руководство пользователя страница 27

-26- 

 

 

6.2 Mounting

 

  Warning

 

1.  Install and operate the product only after reading the Operation Manual carefully and under 

standing its contents. Keep the manual in a safe place future reference. 

2.  Observe the tightening torque for screws. 

Tighten the screws to the recommended torque for mounting the product.

 

3.  Do not make any alterations to this product. 

Alterations made to this product may lead to a loss of durability and damage to the product, which can 

lead to human injury and damage to other equipment and machinery.

 

4.  When using external guide, the guide axis should be parallel to the actuator axis. 

There will be damage/excessive wear on the lead screw if the external guide is not parallel. 

5.  When an external guide is used, connect the moving parts of the product and the load in such 

a way that there is no interference at any point within the stroke. 

Do not scratch or dent the sliding parts of the product tube or piston rod etc., by striking or grasping 

them with other objects. Components are manufactured to precise tolerances, so that even a slight 

deformation may cause faulty operation. 

6.  Prevent the seizure of rotating parts. 

Prevent the seizure of rotating parts (pins, etc.) by applying grease. 

7.  Do not use the product until you verify that the equipment can operate properly. 

After mounting or repair, connect the power supply to the product and perform appropriate functional 

inspections to check it is mounted properly. 

8.  Cantilever 

When the actuator is operated at high speed while it is fixed at one end and free at the other end 

(flange type, foot type, double clevis type, direct mount type), a bending moment may act on the 

actuator due to vibration generated at the stroke end, which can damage the actuator. In such a case, 

install a support bracket to suppress the vibration of the actuator body or reduce the speed so that the 

actuator does not vibrate. Use a support bracket also when moving the actuator body or when a long 

stroke actuator is mounted horizontally and fixed at one end.   

9.  When attaching work piece, do not apply strong impact or large moment. 

If an external force over the allowable moment is applied, it may cause looseness in the guide unit, an 

increase in sliding resistance or other problems. 

10.  Maintenance space 

Allow sufficient space for maintenance and inspection. 

11.  Mounting connectors 

Tighten the screws evenly. Tightening torques are as indicated below. 

 

For brake connector
Screw size: M2
Tightening torque: 0.2 N  m

For power supply connector
Screw size: M2
Tightening torque: 0.2 N  m

For encoder connector
Screw size: M2
Tightening torque: 0.1 N  m

Содержание LECSB

















































Отзывы:

Нет отзывов