- 7 -
2
.
Product Outline
2.1 Product features
The followings are the main functions of this controller:
Connect with CC-Link
Operation from CC-Link, reading information and writing are possible by connecting with CC-Link.
Electric Actuator Control
Positioning operation and Pushing operation, at a specific speed and force, of the electric actuator
are possible by controlling the Step motor (24 VDC servo).
Specified force operation
Control the pushing force (or the pressing force) of the electric actuator.
Separated power supply
The power supply is separated into the drive power and the control power. Therefore, even when
the drive power is off, if the control power is on, the position information from the encoder will be
maintained and the CC-Link communication and serial communication parallel I/O control are still
available.
Return to origin
Return the electric actuator to the home position by sending a signal of return to origin instruction
from CC-Link
Alarm detection function
Automatically detect the abnormal conditions and output the appropriate alarm signal via the
CC-Link communication and serial communication. The alarm information will be recorded into
the memory in the controller.
64 step data
Control the electric actuator according to the step data specified by operating memory that
corresponds to controller's input/output ports of DRIVE signal and INP signal, etc. from CC-Link.
It is possible to setup various parameters for each operation pattern.
Area output
The area output terminal will be activated if the electric actuator position is within the range
specified by “Area 1” and “Area 2” in the step data.
Data input method
It is possible to perform a parameter setup, status monitoring, trial run and alarm reset via the
operation in CC-Link communication or the serial communication with a PC installed with the
controller setting software or the teaching box.
Easy mode and Normal mode
There are two available modes for the controller setting kit and the teaching box. In Easy mode, you
can start the operation by only setting the speed, position, etc. In Normal mode, further detailed setup
can be performed.
Caution
Please keep this manual safe for future use. It will be necessary to refer to this manual along with the
operation manuals for other
electric
actuators, teaching box, and controller setting kit at installation and
faultfinding.
Keep this operation manual accessible for reference.