![background image](http://html.mh-extra.com/html/smc-networks/lecpa-series/lecpa-series_operation-manual_1299839065.webp)
- 64 -
12. Alarm Detection
The details of the alarm can be checked using the controller setting kit or the teaching box.
Please refer to the manuals of the controller setting kit or the teaching box for details of the alarms.
Please refer to section
“12.2 Alarm details”
of this manual on how to, deactivate the alarm.
There are 2 ways to turn off the alarm.
・
Input RESET as a parallel signal.
・
Shut off the control power supply (C24V)
12.1 Parallel output for the alarm group
After generation of the alarm, SVRE or SETON are output according to the contents of the alarm as
below.
Alarm group
Parallel output
Procedure of restart
SVRE
SETON
Alarm group B
OFF
OFF
RESET SVON input
Alarm group C
Alarm group D
Alarm group E
Power off
⇒
Turn on the power again