![background image](http://html.mh-extra.com/html/smc-networks/lecpa-series/lecpa-series_operation-manual_1299839075.webp)
- 74 -
3. The earth cable length should be as short as possible.
[Unpackaging]
Caution
1. Check the received product is as ordered.
If a different product is installed from the one ordered, injury or damage can result.
14.4 Operating environment
Warning
1. Avoid use in the following environments.
a. Locations where a large amount of dust or cutting chips are airborne.
b. Locations where the ambient temperature is outside the range of the temperature specification
(refer to specifications).
c. Locations where the ambient humidity is outside the range of the humidity specification (refer to
specifications).
d. Locations where corrosive gas, flammable gas, sea water, water and steam are present.
e. Locations where strong magnetic or electric fields are generated.
f. Locations where direct vibration or impact is applied to the product.
g. Areas that are dusty, or are exposed to splashes of water or oil drops.
h. Areas exposed to direct sunlight (ultraviolet light).
i. Environment at an altitude of 1000 meters or higher
Heat dissapation and withstand voltage will decrease. Contact your SMC representative for
details.
2. Do not use in an environment where the product is directly exposed to liquid, such as cutting oils.
If cutting oils, coolant or oil mist contaminates the product, failure or increased sliding resistance can
result.
3. Install a protective cover when the product is used in an environment directly exposed to
foreign matters such as dust, cutting chips and spatter.
Play or increased sliding resistance can result.
4. Provide a protective cover if the product is used in direct sunlight.
5. Protect the product from radiated heat generated by nearby heat sources.
When there is a heat source surrounding the product, the radiated heat from the heat source can
increase the temperature of the product beyond the operating temperature range.
6. Grease oil can be reduced due to the external environment and operating conditions. The
lubrication performance may deteriorate and shorten the life of the product.
[Storage]
Warning
1. Do not store the product in direct contact with rain or water drops, or exposed to harmful gas
or liquids.
2. Store in an area that is shaded from direct sunlight and has a temperature and humidity within
the specified range (-10
o
C to 60
o
C and 90% or less No condensation or freezing.
3. Do not apply vibration and impact to the product during storage.
14.5 Maintenance
Warning
1. Do not disassemble or repair the product.
Fire or electric shock can result.
2. Before modifying or checking the wiring, the voltage should be checked with a tester 5 minutes