- 67 –
No.JXC
※
-OMY0002
13.5 Maintenance
Warning
(1) Do not disassemble or repair the product.
Fire or electric shock can result.
(2) Before modifying or checking the wiring, the voltage should be checked with a tester 5 minutes
after the power supply is turned off.
Electrical shock can result.
Cution
(1) Maintenance should be performed according to the procedure indicated in the Operating Manual.
Incorrect handling can cause injury, damage or malfunction of equipment and machinery.
(2) Removal of product.
When equipment is serviced, first confirm that measures are in place to prevent dropping of work pieces
and run-away of equipment, etc., and then cut the power supply to the system. When machinery is
restarted, check that operation is normal with the electric actuators in the proper positions.
(3) When moving the
electric actuator slider manually by hand, please disconnect the electric
actuator cable.
The electric actuator cannot be moved smoothly by the induced voltage of the motor goes to the
controller when the electric actuator slider is moved with the electric actuator connected with the
controller. Moreover, the controller might break down by the induced voltage when moving the electric
actuator slider at high frequency.
[Lubrication]
Cution
(1) The product has been lubricated for life at manufacturer, and does not require lubrication in
service.
Contact SMC if lubrication will be applied.