SMC Networks JXC5H, Руководство по эксплуатации, Страница: 3 / 79

- 2 –
No.JXC
※
-OMY0002
4.3 SI: Serial I/O connector 21
(1) Connection with the teaching box
21
(2) Connection with a PC 22
4.4 Parallel I/O connector
22
5. PWR: Power supply plug 23
5.1 Power supply plug specifications
23
5.2 Electric wire specifications 23
5.3 Wiring of power supply plug
24
(1) Wiring of the power supply (C24V, M24V, 0V) 24
(2) Wiring of the stop switch (EMG)
24
(3) Wiring of the lock release (LK RLS) 24
5.4 Stop circuits
25
(1) Example circuit 1 - Single controller with teaching Box 25
(2) Example circuit 2 - multiple controllers (Relay contact (1))
26
(3) Example circuit 3 - Motor power shutdown (Relay contact (2)) 27
6. Parallel l/O Connector
28
6.1 Parallel I/O specifications 28
6.2 Parallel I/O type (NPN/ PNP type)
28
(1) Parallel I/O input circuit (same for both NPN and PNP type) 28
(2) Parallel I/O output circuit
28
6.3 The parallel I/O signal is detailed 29
6.4 Parallel I/O Wiring Example
36
7. Setting Data Entry 37
7.1 Step data
37
7.2 Basic parameter 40
7.3 Return to origin parameter
43
8. Perations 44
8.1 Return to origin position
44
8.2 Positioning operation 44
8.3 Pushing operation
45
(1) Pushing operation is successfully performed 45
(2) Pushing operation is failed (pushing the air)
45
(3) Movement of the work piece after the completion of the pushing process 45
8.4 Controller input signal response time
46
8.5 Methods of interrupting operation 46
9. Operation (example)
47
9.1 Positioning operation 47
9.2 Pushing operation
48