SMC Networks HRS012-W, Руководство по эксплуатации

Страница: 30 / 82

HRX-OM-M091
Chapter 2 Contact input/output communication
2.6 Contact output signal HRS Series
2-20
Table 2.6-2 Operation of contact output signal
Class of signal
Display Function
Oper
ation
Operation of contact output signal
N.O
type
Normally, output signal is OFF (open)
OFF Without output
N.C
type
Normally, output signal is ON (close)
N.O
type
When the product operates, signal turns on.
RUN Run status signal
N.C
type
When the product operates, signal turns off.
N.O
type
When the product becomes DIO REMOTE, signal turns on.
RMT Remote status signal N.C
type
When the product becomes DIO LOCAL, signal turns off.
N.O
type
When the product becomes completion of preparation
(TEMP READY), signal turns on.
RDY
Signal for completion
of preparation (TEMP
READY)
N.C
type
When the product becomes completion of preparation
(TEMP READY), signal turns off.
N.O
type
When operation stop alarm occurs, signal turns on.
A.STP
Signal for operation
stop alarm
N.C
type
When operation stop alarm occurs, signal turns off.
N.O
type
When continuing operation alarm occurs, signal turns on.
A.RUN Signal for continuing
operation alarm
N.C
type
When continuing operation alarm occurs, signal turns off.
N.O
type
When alarm occurs, signal turns on.
ALM
Alarm status signal
N.C
type
When alarm occurs, signal turns off.
N.O
type
The signal is turned ON when the selected alarm goes off.
A.SEL
Signal for selection
alarm
N.C
type
The signal is turned OFF when the selected alarm goes off.
N.O
type
The signal is turned ON when the run timer is set.
ON.TM Signal for operation
start timer setting
N.C
type
The signal is turned OFF when the run timer is set.
N.O
type
The signal is turned ON when the stop timer is set.
OF.TM
Signal for operation
stop timer setting
N.C
type
The signal is turned OFF when the stop timer is set.
N.O
type
The signal is turned ON when the power recovery is set.
P.RST
Signal for power
recovery setting
N.C
type
The signal is turned OFF when the power recovery is set.
N.O
type
The signal is turned ON when the anti-freezing is set.
F.P.
Signal for anti-freezing
setting
N.C
type
The signal is turned OFF when the anti-freezing is set.
N.O
type
Outputs the signal which is input to the contact input signal.
Input signal is ON
Æ
Output signal is ON
INP1.
∗
1
Pass through signal of
contact input signal 1
N.C
type
Outputs the reverse of the signal which is input to the contact
input signal 2.
Input signal is OFF
Æ Output signal is ON
N.O
type
Outputs the signal which is input to the contact input signal.
Input signal is ON
Æ Output signal is ON
INP2
∗
1
Pass through signal of
contact input signal 2
N.C
type
Outputs the reverse of the signal which is input to the contact
input signal 2
.
Input signal is OFF Æ Output signal is ON
N.O
type
Signal is turned ON during automatic fluid filling.
∗ 2
A.F.
Signal output during
automatic fluid filling
N.C
type
Signal is turned OFF during automatic fluid filling.
∗ 2
∗
1: The signal of the product without an option [Automatic filling] also changes.
∗
2 ： Signal changes even when option J [Automatic fluid filling] is not selected.