SMC Networks HRS012-W, Руководство по эксплуатации

Страница: 18 / 82

HRX-OM-M091
Chapter 2 Contact input/output communication
2.4 Setting and checking HRS Series
2-8
Contact input signal 2 Setting and checking
11.
Press the [SEL] key once.
The set screen of contact input signal 2 is displayed on the digital display.
PV
SV
12.
Select contact input signal 2 from the table below with [ ▲ ] key or [ ▼ ] key, and confirm by
pressing “SEL”.
Table 2.4-7 List of set values
Set values Explanation
Initial value
(Default setting)
Without input signal
○
Input of run/stop signal
External switch signal input(N.O. type)
External switch signal input (N.C. type)
Remote signal
∗ 6
∗
6
：
When the setting of the serial protocol is “Simplified communication protocol 2”,
“Remote signal” cannot be set.
Contact input signal 2 type Setting and checking
13.
Press the [SEL] key once.
The set screen of contact input signal 2 type is displayed on the digital display.
PV
SV
14.
Select contact input signal 2 type from the table below with [ ▲ ] key or [ ▼ ] key, and confirm
by pressing “SEL”.
Table 2.4-8 List of set values
Set values Explanation
Initial value
(Default setting)
Setting/checking are not available if the
setting of contact input signal 2 is OFF.
Alternate signal
○
Momentary signal
∗
7
∗
7:Can be set when the setting of contact input signal 2 is "Run/Stop signal input" or "Remote
signal"