
9880022800-EN-011210.doc
19
EN
Do not touch the hot bulb with a damp cloth, the bulb may break.
Replace the bulb with another appropriate of 25 W for 220 - 230 V with connection type
E14,
suitable for high temperatures.
In case the protection cap is damaged or broken, do not use the oven until the cap has
been replaced or re-inserted correctly and safely.
Attention: to correctly install and use this device, refer too the technical data
reported on the serial label of the product
.
The product label is found on the edge of the internal side of the oven. A second
label is positioned on the cover of the instructions manual.
■
INSTALLATION INSTRUCTIONS
The installation and technical assistance must be carried out by qualified staff.
Carefully read the safety instructions in this manual before using the oven. An
incorrect installation, maintenance, assistance and use can cause serious damages
to persons or things
This product must be installed as envisioned in this manual, in compliance with the
national and local regulations in force.
Do not lift or pull the oven from the door handle and do not force or load weights
when this is open.
The purchaser is responsible for installation and the eventual interventions
requested to the manufacturing company due to an incorrect installation will not
be included in the warranty.
■
Cabinet features
The technical requisites of the cabinet are the following;
- The cabinet and its components must be able to resist to a temperature
of 90°C, without showing surface deformations and/or defects.
- The cabinet must enable the free passage of the oven connections.
- All household kitchen units must be protected using fire-resistant
material according to that requested by the current regulations
.
■
Inserting the oven in the cabinet
It is important that all operations relating to installing the device are carried out by
qualified staff. The oven can be installed in a column or below the worktop of a kitchen
cabinet.