SKYZER TECHNOLOGIES
PAGE 79 OF 81
INGENICO 5100 ANZ VERSION 4.8 OPERATING GUIDE
Version 1.1
7.4 EXTERNAL POWER SUPPLY
•
Only an Ingenico approved power supply (CE Marked) specified for use
with this terminal must be used.
•
Operate only from a power source as specified on the Power Supply
Unit.
7.5 CONNECTIONS
Take due care when attaching cables. Under no circumstances must the PSTN
(i.e. telephone) cable be inserted into the RS232 ports.
Figure 5 - Cable Port Locations
NOTE:
The pinpad cable connects to the RS232-1 port and the ECR interface
cable connects to the RS232-2 port.
Power Supply
cord
PSTN Cable
ECR Interface Cable
Ethernet Cable
Pinpad Cable