Skyzer Ingenico 5100, Руководство по эксплуатации

Страница: 21 / 81

SKYZER TECHNOLOGIES PAGE 21 OF 81
INGENICO 5100 ANZ VERSION 4.8 OPERATING GUIDE Version 1.1
At the
COMMS MODE,
press the corresponding
number key to select
preferred comms mode
and press
ENTER
1-Dial-up
2-TCP-IP/Dial
3-TCP-IP
Broadband Configuration
See note on page 18
4.1.3 TCP-IP (Broadband)/Dial Backup Configuration Flowchart
From the idle screen
press
FUNC
and
then key in
3824
followed by the
ENTER
Key in the Terminal ID
and press
ENTER.
Press
ENTER
at the
CONFIG PARAMS?
Network Interface
Identifier
(NII)
is set by
default as
030
. Press
ENTER
Primary Host IP address
is set as default
156.13.216.220, press
ENTER
.
Secondary Host IP
address is set as default
156.13.216.220, press
ENTER .
Manually key in the
•
Static IP address
•
Subnet Mask
•
Gateway IP
address
followed by ENTER.
START
YES
ena
NO
Enable DHCP Y/N
,
1-YES
is
selected by default. Press
ENTER.
If the site requires static IP
address, press 2-NO . Press
ENTER
.
COMPLETED
START TCP-IP Y/N?
Press
ENTER
to start
TCP-IP or
CLEAR
to exit
without starting TCP-IP
Enter the PABX
number if required
and press
ENTER
. To
put in a pause or wait,
put in the character
‘A’
by pressing
2
and
then
FUNC.
The HOST PHONE
NO?
is set by
default as
08796
.
Press
ENTER
Save Config Y/N?
Press
ENTER
to save
or
CLEAR
to exit
without saving
Dial-up Configuration
Dial Mode, press the
corresponding
number key to select
preferred dial mode
and press
ENTER
1-Tone (Default)
2-Pulse
3-Tone/Blind
Press the
ENTER
key to
scroll through the
menu until
SUPERVISOR
is
displayed.
Press SAV key to select
INIT
, to perform a
merchant logon.
Press
ENTER
to scroll through
until
SUPERVISOR
menu is
displayed. Press CHQ to select
XTRA
. At
TERMINAL FUNCTIONS
press number
2
to display KVC.
Press
ENTER
to print off the
terminal configuration receipt.
OPTIONAL