SKYZER TECHNOLOGIES
PAGE 66 OF 81
INGENICO 5100 ANZ VERSION 4.8 OPERATING GUIDE
Version 1.1
5.12 MERCHANT ADMINISTRATION FUNCTIONS
The following standard merchant administration functions are available:
NOTE
: When set up as a multi-merchant device, the terminal will first prompt for
the selection of the particular merchant for each of the administration
functions above.
5.12.1
Terminal Totals
This function allows the merchant to determine the total count and amount of
all accepted transactions supported by the terminal since the totals where last
reset by the merchant.
Step
Terminal Display
Description
1.0
ADMIN
ADMIN
ADMIN
ADMIN
TOTL INQ CUT
TOTL INQ CUT
TOTL INQ CUT
TOTL INQ CUT
Press
ENTER
until the
ADMIN
menu is shown on the display.
Press
CHQ
key to select
TOTL
.
2.0
1 MERCHANT 1
1 MERCHANT 1
1 MERCHANT 1
1 MERCHANT 1
2 MERCHANT 2
2 MERCHANT 2
2 MERCHANT 2
2 MERCHANT 2
3 MERCHANT 3
3 MERCHANT 3
3 MERCHANT 3
3 MERCHANT 3
Only applicable with Multi-Merchant setup.
Use the scroll key
CHQ
or
SAV
or press the corresponding number on the terminal to
select the Merchant followed by the
ENTER
.
3.0
PRINTING
PRINTING
PRINTING
PRINTING
Totals will be printed immediately.
4.0
RESET TOTALS?
RESET TOTALS?
RESET TOTALS?
RESET TOTALS?
ENTER=YES, CLR=NO
ENTER=YES, CLR=NO
ENTER=YES, CLR=NO
ENTER=YES, CLR=NO
The user will be prompted whether the totals should be reset.
- If yes is selected, the terminal will return to idle and totals will have been reset. (To
check this, repeat steps 1-2. Totals will appear as $0.00 on the printout.)
- If no is selected, terminal will return to idle without resetting the totals. (To check
this, repeat steps 1-2. Totals will remain the same.)