SKY Agriculture Methys FT, Оригинальное руководство пользователя

Страница: 119 / 173

M S
EEDING CONTROLLER
(
OPTIONAL
)
The sowing controller allows continually monitoring whether the rows do deliver the seeds and are not clogged.
It is still possible that dosage levels, type of seed or other factors do not allow the sowing controller to operate.
When the seeding controller disengages, an alert is sent to the user, then an indicator is displayed alongside the relevant seeding
bar on the main screen.
In all cases, it is up to the user to check that the sowing controller is active and has a detection threshold suited to sowing
conditions before starting any sowing job.
To check this, simulate a forward movement speed from the simulation menu and in sowing mode, block a sowing component.
The sowing controller should alert you within 60 seconds.
If the seeding controller does not inform you fast enough, then increase the detection threshold set for the product used from the
«Advanced Settings», then «Machine Settings» and «Distribution Confi guration» menus.
From the tab, select your product from the box.
Then adjust the detection threshold from the fi eld.
If on the contrary you feel that the seeding controller is too sensitive, then you can reduce the detection threshold for the relevant
product.
In all cases, it is up to the user to check that the sowing controller is active and has a detection threshold suited to sowing
conditions before starting any sowing job.
Product Factory setting (%)
Detection
capacity
Wheat 5 YES
Barley 60 YES
Oat 180 YES
Peas 1 YES (with limitations)
Horse beans 1 NO
Rye 180 YES
Rye-grass 170 YES
Lucern 200 NO
Linseed 10 YES
Rape 5 YES (with limitations)
Clover 170 YES
Phacelia 10 YES
Sorghum 18 YES
Sunfl ower 1 NO
Maize 80 NO
Nitrogen fertilisers 200 YES
Phosphorous fertilisers 140 YES
Micro-pelletised fertilisers - NO
Slug pellets 1 NO
Soy 5 YES
Buckwheat 40 YES
Mustard 1 YES (with limitations)
Triticale 9 YES
Lupin 1 NO
Product Factory setting (%)
Detection
capacity
Radish 1 NO
Rape 1 NO
Spelt 60 YES
Cocksfoot 20 YES (with limitations)
Bromine 20 YES
Fescue 110 YES
Moha 60 YES
Hemp 60 YES
Timothy seed 180 NO
Vetch 1 NO
Fenugreek 40 YES
Grass pea 1 NO
Lentil 20 YES
Trefoil 140 YES
Nyjer 1 YES
Camelina 1 NO
Oil poppy 8 YES (with limitations)
Sainfoin 6 YES
Millet 10 YES
This table is provided as an indication only as activation or deactivation is linked to the dosage but also to forward
movement speed during sowing. You may therefore observe diff erences between actual data and the data seen in this
table.
The seeding controller makes allowance for factors such as forward movement speed when operating.
As the forward movement speed may vary, the seeding controller may activate or deactivate during seeding.
Every controller deactivation always comes with an alert.
If you encounter an unstable situation or if you often receive controller deactivation alerts, then there are two solutions:
1- Stabilise the forward movement speed
2- Manually disable the seeding controller using the button.
When performing «Multi-Product» seeding, the seeding controller is active if all of the products used can be detected.
119
EN
5
Utilisation et Réglages de la machine / Machine use and Settings / Bedienung und
Einstellung der Maschine