SKF LINCOLN VP Series, Руководство по эксплуатации

Страница: 16 / 118

- 16 -
951-180-083-EN
Version 02
EN
1. Safety instructions
○
Observe any possible wearing spots. Pro-
tect components appropriately.
○
All components used must be designed
for:
- The maximum operating pressure
- The maximum/minimum ambient tem-
perature
- The lubricant to be delivered
- The required ATEX zone
- The operating and ambient conditions
at the place of use.
○
No parts may be subjected to torsion,
shearing, or bending.
○
Check parts for contamination before use
and clean if necessary.
○
Lubrication lines should be filled with lu-
bricant prior to assembly. This simplifies
subsequent bleeding of the system.
○
Adhere to the specified torques. Use
a calibrated torque wrench when
tightening.
○
Use suitable hoisting equipment when
working with heavy parts.
○
Avoid mixing up or incorrectly assem-
bling disassembled parts. Label parts.
1.19 First start-up, daily start-up
Ensure that:
○
All safety mechanisms are fully present
and functional
○
All connections are properly connected
○
All parts are correctly installed
○
All warning labels on the product are fully
present, visible, and undamaged
○
Illegible or missing warning labels are
immediately replaced.