59 62 134 D 3407
90
D 3407
.
208.01.10
.
02 07.2009
3 Operation
Sirona Dental Systems GmbH
Analysis tools
Operator’s Manual SIDEXIS XG
Configuration
● On the left are three transverse partial images (TSA) with slightly different
magnifications depending on the linear position (magnification as with
normal TSA thin layer).
● On the right is the lateral partial image with a magnification of
approximately 1:1.24 (magnification similar to that with panoramic
exposures).
Nominal magnifications for TSA exposures with an ORTHOPHOS
XG Plus:
Note: All magnifications are approximate values in terms of the positioning
precision in relation to objects in the center of the layer
3.7.3.1.2
Measurement
Activating the measurement tool
➢ Click the button.
or
➢ In the menu bar
"[A]nalysis"
, select the
"Measure [l]ength"
function.
Simple linear measurement
1. Determine the starting point with the mouse pointer.
2. Confirm the starting point by clicking the left mouse button.
3. Drag the mouse pointer to the desired end point.
ª
Both points are connected by a line.
4. Confirm the measured length by double-clicking the left mouse button.
Measuring the length across several
interpolation points
1. Determine the starting point with the mouse pointer.
2. Confirm the starting point by clicking the left mouse button.
3. Drag the mouse pointer to the desired first interpolation point.
4. Confirm this interpolation point by clicking the left mouse button.
5. Repeat steps 3 and 4 until you have reached the desired end point.
ª
The length that has just been measured is then extended segment by
segment.
6. Confirm the measured length by double-clicking the left mouse button.
Indication of the measured value
● The length between starting point and end point is displayed next to the
connection line as well as on the status bar at the bottom of the program
window.
● The total length is displayed on the status bar and next to the last line
segment.
Exposure Area
Magnification factor
TSA Exposures (3x)
Magnification Factor
Lateral (1x)
Linear positions
Anterior tooth
1:1,38
1:1,24
0-5
Canine tooth
1:1,38
1:1,24
6-14
Pre-molar
1:1.34
1:1,24
15-35
Molar
1:1.40
1:1,24
36-65
