Simex SRD-99, Руководство пользователя

Страница: 46 / 112

User manual - DATA RECORDER SRD-99 and cooperating software
If the display backlight is inactive and the “ Backlight ” option was set as
“ temporary ” pressing any key will only switch the backlight on.
Fig. 7.14. ”Display options”
menu
7.4.3. ”Logging setup” menu
This menu contains options defining the recording method and recorded channels:
”Write” - this option defines the behaviour of the unit after writing all available memory with
the recorded measurement results. The following options are available:
”until full” - once the entire available memory is filled with recorded measurement
results the recording will be stopped and a warning message (
Fig. 7.15 )
shall be displayed; this warning message must be confirmed with the
[
ENTER ] key.
This warning shall be repeated when the unit is switched on. Instead of
“
Time left
” parameter in the "
Device information
” menu the display will
show the “
Logging stopped
” message. The recording will be restarted
only when the collected measurement results are downloaded to a PC
(once unit's memory is free).
If the collected measurement results will be downloaded to a PC before
memory is full, the warning message will not be displayed.
Fig. 7.15. Warning in “ until full ” recording mode
”cyclic” - after filling all the available memory with recorded measurement results, the
measurement results recorded next will be written from the starting address in
the memory, overwriting previously recorded data. During the first overwriting
operation a warning message (
Fig. 7.16
) will be displayed; this message must
be confirmed with the [ ENTER ] key. This warning shall be repeated when the
unit is switched on. Instead of “ Time left ” parameter in the
" Device information ” menu the display will show the “ Data overwriting ”
message.
If the collected measurement results will be downloaded to a PC before
memory is full, the warning message will not be displayed.
46
i