Simex SRD-99, Руководство пользователя

Страница: 48 / 112

User manual - DATA RECORDER SRD-99 and cooperating software
”disabled” - data from the selected measurement channel will not be recorded,
”current v.” - current values (corresponding to the results of current measurements)
will be recorded for the selected measurement channel,
”average v.” - averaged values will be recorded for the selected measurement channel
(see section
MEASUREMENT MODE , point 6.1.5 ).
If the
“Input type”
in the
“Inputs settings”
menu shall be set as
“disabled”
for a
given channel, then this channel will not be available on the list of recording
channels in the
“Logging setup” menu.
Fig. 7.18. Recording points depending on “Triggering” parameter value.
7.4.4. “Temperature unit” parameter (RTD version)
This parameter allows to change unit in which the measurements are made. Available
scales are Celsius and Fahrenheit.
48
i
„disabled“
„disabled“
„current v.“ or „average v.“
low (0V)
high (24V)
low (0V)
” Rec.period ”
parameter
registered measurements
registered measurements
registered measurements
. . .
”Channel 1”...”Channel 8”
parameters settings
Didital input state
All possible points of data
registration synchronized to
internal clock
Points of data registration
for option
”
Triggering ”=” Always ”
Points of data registration
for option
”
Triggering ”=” hi level ”
Points of data registration
for option
”
Triggering ”=” lo level ”