Simex SRD-99, Руководство пользователя

Страница: 31 / 112

User manual - DATA RECORDER SRD-99 and cooperating software
If the settings of the horizontal scale (time scale) will be too big (time/point) in relation
to speed of changes of the measurement signal, the graph can become illegible. If
this is the case, change the time scale settings. The horizontal scale settings (time
scale) can be changed in the "
Graph options " menu. In order to go to the
" Graph options " menu press the [ESC/MENU] key.
Functions of keys in "Graph" mode:
• go to main menu (press and hold for approx. 2 seconds),
• go to "
Graph options
" menu, description on page
43
,
• change channel number,
• change results presentation mode.
Fig. 6.21. Message displayed when loading data to be displayed on the graph
If downloading the data (recorded measurement results) necessary for displaying the
graph takes more than 1 second an appropriate message is displayed (
Fig. 6.21
).
Pressing [ENTER] will stop the data downloading process and display a graph made
on the basis of the data downloaded so far. " X " will be displayed instead of data that
was not downloaded ( Fig. 6.22 ).
Fig. 6.22. Display in " Graph " mode in the case where data download was stopped.
6.2.4. ”Channels List” mode
In this mode (
Fig. 6.23
,
6.24
) the display shows the results of the current measurements
for the active channels of the unit. The measurement results can be presented in numeric form
or in the form of a bar (percentage) depending on the settings in the "
Channels list options "
menu. Graphic indicators (bars) always show the measurement result to the
user defined
range ratio.
31
i
i
Progress bar
pressing of [ ENTER ] button
stops data downloading
”X” sign displayed
instead of data that was
not downloaded graph created
from downloaded
data
MENU
ESC