User manual - DATA RECORDER SRD-99 and cooperating software
Fig. 6.13. Exceeding allowable range in "
Single channel
" mode
Functions of keys in "Single channel" mode:
•
go to main menu (press and hold for approx. 2 seconds),
•
change channel number,
•
change results presentation mode.
6.2.2.
"Measurements list" mode
The values displayed in this mode depend on the set type of recorded value (see
description of parameters "
Channel 1
"..."
Channel 8
" in the "
Logging setup
" menu).
In the case of recording momentary values in this mode (
) the display shows
9 consecutive measurement results (including their execution time) in numeric form for one of
the active channels. It is possible to view the last recorded measurement results or results of
measurements recorded previously (depending on the "
List type
" parameter setting in the
"
Measurements list options
" menu). If the result of the measurement recorded for the given
channel exceeds
allowable measurement range
, instead of the result in numeric form the ”
-
Hi-
” or "
-Lo-
" message is displayed (depending on the direction of exceeding, see description
of "
Upper ext.
" and "
Lower ext.
" parameters in the "
Inputs settings
" menu). In order to go to
the "
Measurements list options
" menu press the
[ESC/MENU]
key.
If the "
List type
" parameter in the "
Measurements list options
" menu is set as "
current
"
), the last of the displayed results (displayed in negative) concerns the current
measurement (not recorded). Above the result of the current measurement the display shows
the measurement recorded so far (stored in the non-volatile memory) for the given channel. If
there are no recorded measurements in the unit's memory at the moment, the list of recorded
measurements will be empty and only the result of the current measurement will be displayed.
Pressing the
[ENTER]
and
[^]
keys simultaneously allows list type to be switched from current
to historical.
Returning to the current list type is only possible from the "
Measurements list
options
" menu.
26
MENU
ESC
arrow indicates
exceeding
of
user defined range
channel number
current time
channel name
current date
percentage value of exceeding
unit name
warning message
informing that input allowable
range is exceeded
i
