SGI
®
Altix
®
XE210 User’s Guide
71
BIOS Default Settings
The following tables show the factory-configured BIOS settings for SGI Altix XE family
systems.
Note: Most system configurations use the settings shown in the “Standard Settings” column.
However, certain settings differ from the standard settings for Altix XE240 systems with
active backplanes and for Altix XE210 systems with passive backplanes. These setting
differences are shown in the “XE240 Active” column and the “XE210 Passive” column of
each table.
<F10>
Save and Exit - Pressing <F10> causes the following message to
appear:
Setup Confirmation
Save Configuration changes and exit now?
[Yes] [No]
If "Yes" is selected and the <Enter> key is pressed, all changes are
saved and Setup is exited. If "No" is selected and the <Enter> key is
pressed, or the <Esc> key is pressed, the user is returned to where they
were before <F10> was pressed without affecting any existing values.
Table 3. Setup Menu Key Use (Cont’d)
Key to Press
Description
Table 4. Settings on the Main Screen
Option
Standard Settings
Differences
XE240 Active
XE210 Passive
Quiet Boot
Enable
POST Error Code
Disable
System Date
date
System Time
time
Table 5. Settings on the Advanced Screen
Option
Standard Settings
Differences
XE240 Active
XE210 Passive
Processor
Enhanced Speedstep Technology
Enable
