manualshive.com logo in svg

Silicon Graphics Altix XE210, Руководство пользователя

Поделиться
Скачать
Silicon Graphics Altix XE210 Скачать руководство пользователя страница 117

SGI

®

 Altix

®

 XE210 User’s Guide

101

Korean Compliance (RRL)

Following is the RRL certification information for Korea.

English translation of the notice above:

1. Type of Equipment (Model Name): On License and Product

2. Certification No.: On RRL certificate. Obtain certificate from local Intel 

representative

3. Name of Certification Recipient: Intel Corporation

4. Date of Manufacturer: Refer to date code on product

5. Manufacturer/Nation: Intel Corporation/Refer to country of origin marked on 

product

CNCA (CCC-China)

The CCC Certification Marking and EMC warning is located on the outside rear area of 
the product.

Regulated Specified Components

To maintain the UL listing and compliance to other regulatory certifications and/or 
declarations, the following regulated components must be used and conditions adhered to. 
Interchanging or use of other components will void the UL listing and other product 
certifications and approvals.

For updated product information for configurations, contact your SGI representative.

•

Server Chassis:

 (base chassis is provided with power supply and fans) - UL listed.

•

Server board:

 you must use an SGI server board - UL recognized.

•

Add-in boards:

 must have a printed wiring board flammability rating of minimum 

UL94V-1. Add-in boards containing external power connectors and/or lithium 
batteries must be UL recognized or UL listed. Any add-in board containing modem 

Содержание Altix XE210































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды