ii
SGI
®
Altix
®
XE210 User’s Guide
Limited Rights Legend
The software described in this document is “commercial computer software” provided with restricted rights (except
as to included open/free source) as specified in the FAR 52.227-19 and/or the DFAR 227.7202, or successive
sections. Use beyond license provisions is a violation of worldwide intellectual property laws, treaties and
conventions. This document is provided with limited rights as defined in 52.227-14.
The electronic (software) version of this document was developed at private expense; if acquired under an
agreement with the USA government or any contractor thereto, it is acquired as “commercial computer software”
subject to the provisions of its applicable license agreement, as specified in (a) 48 CFR 12.212 of the FAR; or, if
acquired for Department of Defense units, (b) 48 CFR 227-7202 of the DoD FAR Supplement; or sections
succeeding thereto. Contractor/manufacturer is Silicon Graphics, Inc., 1500 Crittenden Lane, Mountain View, CA
94043.
Disclaimer
Information in this document is provided in connection with SGI® products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in SGI's
Terms and Conditions of Sale for such products, SGI assumes no liability whatsoever, and SGI disclaims any
express or implied warranty, relating to sale and/or use of SGI products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. SGI products are not designed, intended or authorized for use in any medical, life saving, or life sustaining
applications or for any other application in which the failure of the SGI product could create a situation where
personal injury or death may occur. SGI may make changes to specifications and product descriptions at any time,
without notice.
SGI server boards contain a number of high-density VLSI and power delivery components that need adequate
airflow for cooling. SGI's own chassis are designed and tested to meet the intended thermal requirements of these
components when the fully integrated system is used together. It is the responsibility of the system integrator that
chooses not to use SGI developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of airflow required for their specific application and environmental conditions. SGI can not be
held responsible if components fail or the server board does not operate correctly when used outside any of their
published operating or non-operating limits.
Trademark Attirbutions
Silicon Graphics, SGI, the SGI logo, and Altix are registered trademarks of Silicon Graphics, Inc. in the United States
and/or other countries worldwide.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United
States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2006, Silicon Graphics, Inc. All Rights Reserved
