26
SGI
®
Altix
®
XE210 User’s Guide
Figure 19. Installing the Processor Air Duct
Installing and Removing Memory
The silkscreen on the board for the DIMMs displays DIMM A1, DIMM A2, DIMM B1,
DIMM B2, DIMM C1, DIMM C2, DIMM D1 and DIMM D2 starting from the center of
the board. Contact your SGI representative for qualified memory components.
Installing DIMMs
To install DIMMs, follow these steps:
1. Observe the safety and ESD precautions in
“Safety Information”
.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord(s) from the server.
4. Remove the server's cover. See
“Removing and Installing the System Cover”
for
instructions on removing the server's cover.
5. Locate the DIMM sockets (see
Figure 20
).
TP02202
