manualshive.com logo in svg

Silicon Graphics Altix XE210, Руководство пользователя

Поделиться
Скачать
Silicon Graphics Altix XE210 Скачать руководство пользователя страница 155

SGI

®

 Altix

®

 XE210 User’s Guide

139

Appendix F: e1000 Driver Update for 

SLES9 SP3

The Ethernet interfaces on the Altix XE platform have an implementation of the Intel 
e1000 chipset that is not supported on the SLES9 SP3 operating system.

Your Altix XE system includes the SGI Altix XE Platform Update CD, which can be used 
as a driver update disk for SLES9 SP3. This appendix provides the instructions for the 
update.

 Special Notes

 Note the following:

•

SLES9 SP3 itself is a driver update.

•

This driver update will be used until you remove it.

SLES9 SP3, A Driver Update Itself

Per the instructions in this appendix, when you enable the Driver Update functionality of 
the installer, you must include both SLES9 SP3 and the SGI Altix XE Platform Update 
CD. If you do not follow the instructions, your system may not boot after installation.

Driver Update Persists until Removed

The SGI e1000 driver update will be used until you remove the kernel objects. If there is a 
SLES fix for the e1000 driver in a maintenance update or service pack, nothing will 
automatically remove the SGI driver update. Therefore, it is important you understand 
how to remove this update.

The Intel e1000 driver is installed on the target system in the following directories:

•

/lib/modules/2.6.5-override-default/e1000.ko

•

/lib/modules/2.6.5-override-smp/e1000.ko

Содержание Altix XE210































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды