SII SLP720RT Series Скачать руководство пользователя страница 8

Страница: 8 / 46

Procedures to take when in trouble

Follow the instructions in the following cases. Failure to follow the instructions may lead fire, electric shock,

or accident.

Turn off the printer, and unplug the AC plug from the outlet in any of the following cases:

◆

Abnormal status continues.

◆

The products are giving off an unusual smell, smoke, excessive heat or unusual noise.

◆

A piece of metal, water or other foreign objects get into the products.

◆

The case is broken.

When the cable of the AC adapter or AC cable is damaged, unplug the AC plug from the outlet.

DO NOT use a damaged AC adapter or AC cable.

CAUTION

Observe the following instructions. Failure to follow the instructions may lead fire, electric shock, or

accident.

Turn off the printer and unplug the AC plug from the outlet when not in use for a long time or

before maintenance.

DO NOT use or store the products in the following locations:

◆

Locations exposed to direct sunlight or high temperature.

◆

Locations exposed to high humidity, a lot of dust, and liquid.

◆

Locations subject to strong vibration, or unstable locations.

DO NOT cover the products with a cloth when in use.

NEVER touch the thermal head immediately after printing because it may get hot. Be sure to allow

it to cool down before clearing a paper jam or cleaning the head.

The autocutter printer has an exposed cutter blade in the paper outlet. Do not insert fingers into

printer.

DO NOT touch the cutter blade directly while the top cover of the printer is open.

Keep loose objects such as long hair away from the printer while the printer operates. When they

fall into the printer, it may cause personal injury or damage the printer.

Keep the products away from infants and children.

Содержание SLP720RT Series















































Результаты поиска

Содержание SLP720RT Series

Отзывы:

Похожие инструкции для SLP720RT Series

Бренды по названию

Популярные бренды

SII SLP720RT Series, Руководство пользователя

Результаты поиска

Содержание SLP720RT Series

Отзывы:

Похожие инструкции для SLP720RT Series

Бренды по названию

Популярные бренды