27
A message for selecting the setting value of the selected function is printed as an example shown in
Press the FEED Switch the number of times corresponding to the selected setting value number,
and then press the POWER Switch.
・
When pressing the FEED Switch twice, "2 : Green" is selected.
Figure 11-4 Setting Value Selection Message
(Example: Selected Standby LED)
A message for confirming the selected setting value is printed as an example shown in Figure 11-5.
Figure 11-5 Setting Value Confirmation Message
(Example: Selected Green)
Press the FEED Switch to save the setting value to the memory. Figure 11-2 is printed.
Press the POWER Switch to discard the selected item. A message of the function selection is
printed as an example shown in Figure 11-3. If select "0 : Return to MS Selection" there, function
selection is not performed, and Figure 11-2 is printed.
To continue to set functions, return to (4).
To exit the Setting Mode, select "0 : Exit" in Figure 11-2.
The test print and Figure 11-1 printing start again. Verify that the functions are properly set.
[Standby LED]
0 : Return to function selection
1 : Aqua
2 : Green
3 : Off
4 : Blue
Press the FEED switch an equal
number of times to the selected number.
After that, press the POWER SW.
[Standby LED]
Set Green
Save setting : Feed SW
Discard setting : Power SW
