30
Wireless LAN Interface
(1) Turn on the printer and connect it to the host device wirelessly.
In the factory state, the settings are as follows:
Mode
: Simple AP (simple access point)
Standard
: IEEE802.11b/g/n (2.4GHz frequency range)
SSID
: SII-Printer
Security
: None
IP address for the printer : 192.168.0.1
(2) View the page "http://192.168.0.1" from the Web browser.
The printer setting screen is displayed. Make necessary settings.
These settings are enabled after rebooting.
(3) Check the communication state on the host device.
(4) Send data from the host device, and verify that the data is printed correctly.
WARNING
◆
The printer may affect medical or other electronic devices. Obtain information and
data concerning influence due to radio interference from the respective manufacturers
or dealers.
◆
When using the printer in medical institutions, follow their guidelines.
◆
DO NOT use the printer in areas or zones where its use is prohibited.
