SIGRIST FireGuard 2 Integral, Инструкция по эксплуатации

Страница: 91 / 102

Packaging / Transport / Returning Instruction Manual FireGuard 2
13542E/4 91
Pos : 185 /Verpac kung/Tr ansport/R üc ks endung/Titel 1_Ver pac kung / Tr ansport / R üc ks endung @ 0\ mod_1350476823463_20. doc x @ 7623 @ 1 @ 1
13 Packaging / Transport / Returning
Pos : 186 /Verpac kung/Tr ansport/R üc ks endung/Text_Verpac kung/Tr ansport/R üc ks endungen Allgemein @ 7\ mod_1507809444333_20.doc x @ 37852 @ @ 1
DANGER!
Injuries to persons due to hazardous media residues in the returned instrument.
Instruments that have come into contact with hazardous media may not be sent without the
appropriate information on the corresponding repairs or professional decontamination (see
RMA form).

Precise information on the medium must be received by SIGRIST-PHOTOMETER in ad-
vance of the instrument to be repaired so that the necessary precautions can be taken
when unpacking it.
The original packaging materials should be used for packaging the FireGuard 2 if possible. If
the original packaging is no longer available, note the following information:

Before packaging, close the openings of the instrument with adhesive tape or plugs so
that no packaging materials can enter the instrument.

The instrument contains optical and electronic components. Make sure that the packag-
ing protects the instrument from being damaged by impacts during transport.

All peripheral devices and accessory parts must be packaged separately and marked with
the serial number of the photometer (Section 2.2). This prevents confusion and mix-ups
later while also making it easier to identify parts.

A RMA form (14711E) must be filled in and enclosed for all returned instruments and
spare parts. This can be downloaded at
www.photometer.com .
When packaged as described above, the instruments can be transported via all usual ship-
ping methods.
Pos : 187 /---Seit enumbruc h--- @ 0\ mod_1341482862121_0. doc x @ 4073 @ @ 1