6-16HS
6 Using the centrifuge
Version 06/2012, Rev. 1.0 • sb-kue
41
Translation of the original operating manual
If changes are made to a blocked function, the system will ask for the code
prior to executing the change.
Unblocking a function
• Select the button "Deactivate code".
• Enter the code and confirm the entry.
The function is now unblocked.
Changing the code
• Select the button "Change code".
• Enter the old code and confirm the entry.
• Enter the new code.
• For safety reasons, the code must be entered a second time.
The code is now changed.
Pos: 135 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1
Pos: 136 /10 0 Sigm a/10 0 BA Z entrif uge n (St anda rd mod ule)/ 060 Betrie b_Spinc ont rol L +S/Spinco ntr ol S ( Zent 7)/ 060 -00 30- 0020 -0 070 Me nü Set up @ 10\ mo d_13 303 404 243 23_ 68.d ocx @ 603 16 @ 44 @ 1
6.3.2.7 Setup menu
The "Setup" menu can be used to perform basic settings concerning the
control system of the centrifuge. It enables the optimum adaptation of the
centrifuge to its specific area of application.
Fig. 18: Setup menu
Function
Open lid after run
The automatic lid opening function must be activated so that the lid opens
automatically at the end of the operation.
CAUTION
When the lid is open, the cooling is not active. The samples may warm up!