Sigma 6-16HS Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 83

Sigma 6-16HS Скачать руководство пользователя страница 33

6-16HS

6 Using the centrifuge

Version 06/2012, Rev. 1.0 • sb-kue

33

Translation of the original operating manual

Pos: 132 /10 0 Sigm a/10 0 BA Z entrif uge n (St anda rd mod ule)/ 060 Betrie b_Spinc ont rol L +S/Spinco ntr ol S ( Zent 7)/ 060 -00 30- 0020 -0 052 Me nü Sta nda rd -nu r HS @ 1 0\m od_ 132 877 752 9344 _68 .docx @ 5 818 9 @ 4 4 @ 4

6.3.2.5 Standard

menu

The standard menu is displayed a few seconds after the centrifuge has
been switched on. The following parameters can be displayed and
modified.

NOTE

As a default setting of the 6-16HS, the petroleum program "ASTM oil" is
stored in the system (see the "program selection list" in this chapter).

Fig. 12: Standard menu

Speed

In the upper section of the field, the set speed of the centrifuge is displayed.
The actual speed is displayed below this value. The values are stated in
revolutions per minute (rpm) and depend on the RCF values (see chapter
2.2.2.1 - "

Speed, radius, and relative centrifugal force

"). The maximum

speed values depend on the rotor that is used.

Relative centrifugal force (RCF)

The relative centrifugal force is the acceleration that the sample is
subjected to. The set value of this parameter is displayed in the upper

section of this field, with the actual value shown below. The values are
stated in g (gravitational acceleration) and depend on the speed value (see
chapter 2.2.2.1 - "

Speed, radius, and relative centrifugal force

"). The

maximum RCF values depend on the rotor that is used.

Temperature

The set temperature is displayed in the upper section of the field, with the
current rotor chamber temperature shown below. Temperatures between
-20°C and +60°C can be preselected.

«
...
31
32
33
34
35
...
»

Содержание 6-16HS




















































































Отзывы:

Нет отзывов