Siemens VDO DTCO 1381, Техническое описание

Страница: 264 / 302

Service only
13.4 Messages and troubleshooting measures Events and faults
13 - 32
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 13
2 102
13.4.6 Security breach warning messages
The DTCO 1381 recognizes security breaches and outputs a corre-
sponding warning message.
The warning message consists of:
• Entry in the DTCO 1381 data memory
• Entry on the inserted tachograph cards
• Warning message on the display of the DTCO 1381
• TCO status output on the CAN bus and on the info interface
• Signal to output D4 (TCO warning output)
If the DTCO 1381 is in the calibration mode, some messages will be
accompanied by an additional pictogram (letter) in the display; see
column "AP".
The error code can be read-out over the diagnosis interfaces (CAN or
K-Line) with a test device, but it will not be shown on the display of
the DTCO 1381.
Displayed or printed warnings regarding security breaches are
broken down with an additional code, see chapter 14.5 "Memory
behaviour during events or faults", page 14-30.
DTCO 1381 display
Picto. AP Error text MC Error code Meaning, cause and measures
v " TFDVSJUZáCSFBDI
8000002452 Data security fault. Internal sensor error, the motion sensor
indicates an error in the data integrity.
Measures
– Check KITAS 2171.
Replace KITAS 2171 if necessary.
2)
v # TFDVSJUZáCSFBDI
8000002452 Internal sensor error, authentication error. The motion
sensor indicates an error during authentication.
Measures
– Check KITAS 2171.
– Use a test device to pair the KITAS 2171 with the
DTCO 1381.
Replace KITAS 2171 if necessary.
2)
1)
These warning messages will be displayed repetitively every hour until the cause is withdrawn.
2)
These warning messages are not saved in the date memory during calibration mode.