manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 96 / 574

Поделиться
Скачать
Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 96

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

Software Related Safety Information

Safety

A.4-2

Unique identification

A.4

Patient name, patient ID, date of birth and sex are used for 
unique identification of a patient in the databases or of 
exported data on devices.

A.4

A.4

A.4

CAUTION

A.4

The internal identification of patient data, e.g., studies,series 
and images, uses the system time for generation of the patient 
identification. If it is necessary to move system time back dupli-
cate identified may be created!

A.4

Data may be assigned to wrong patient.

A.4

✧

If it is necessary to move system time back, for synchroniza-
tion, wait until the new system time is greater than before.

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов